Maintenance Menu; Dedicated Keys - Tascam DA-78HR Owner's Manual

4.11Maintenance menu

The following menu provides
information relating to maintenance procedures, etc.
V alues
Display
(*=default)
(system).*
(version)
(front),
(servo)
System, front panel driver, servo software (firmware) versions
* (total),
(drum time)
(search)
Number of hours the drum has been in use
*
(cleaning)
Starts the head cleaning process
*,
(block error rate)
Displays the current block error rate
*
(backup memory
initialization)
(emulated device
,
type)
Described in
11.3, " Checking
version numbers"
11.1.3, "Checking
drum time "
11.1, " Head and
transport cleaning"
11.1.2, "Checking
error rates"
11.2, " Backup
memory initializa-
tion"
*, 7.13, " Emulation"
,
4 - Menu interface, etc.

4.12Dedicated keys

The following (shifted) keys also allow settings to be
made. These are fully described in the appropriate
sections of the manual:
Ke y Description
DELAY Individual relative
track delay
OFFSET
Offset relative to
timecode or abso-
lute times
PREROLL
Locate pre-roll
and auto-punch
pre- and post-roll
times
PITCH
Varispeed
(±6.0%)
LOC/MEMO 1
Location memory
points
LOC/MEMO 2
Described in
7.3, "Track delay"
8.3, "Machine off-
set" and 9.6.2,
"Timecode offset"
5.6.4, "Editing the
pre-roll and post-
roll times" and
7.1.3, "Setting the
location pre-roll
time"
7.6, "Vari speed
(pitch control)"
7.1, "Autolocation"
26
TASCAM DA-78HR