Tascam DA-78HR Owner's Manual page 46

2 Press the
SHIFT
key so that the
is flashing, and press the
display shows
3 Press the
SUB MENU
shows ( LOAD OFF
4 Press the
key to make the DA-78HR ready
for loading the settings. The display will show
( READY ).
5 Press the
key again to actually start the
restore operation.
The DA-78HR will automatically search to the
position on the tape where the data has been
saved, and will read the data, loading it into
memory. While the data is being read from
tape, the display shows
( READING ).
SHIFT
indicator
MENU key until the
( SYSTEM-- ).
key until the display
).
7 - Advanced operations
6 If the settings data on the tape has been read
successfully, the display will show
( READ OK ). The unit will then re-start, as if
power had just been turned on.
If there is no tape inserted (or the tape has not been
formatted) when the load operation is readied, the
display shows
If the tape is not stopped when the load operation is
readied, the display shows
STOP ).
If no data can be located on the tape, the display will
NO DATA
show (
If an error is encountered while the reading is taking
place, the display will show
ERR
).
NO TAPE
( ).
( NOT
).
( READ
46
TASCAM DA-78HR