Audio2 Menu - Tascam DA-78HR Owner's Manual

V alues
Display
(*=default)
(rec mute)
or individual
tracks
Rec mute function

4.6 AUDIO2 menu

This menu provides addi-
tional audio parameter settings:
V alues
Display
(*=default)
* through
(crossfade)
(in 10 ms incre-
ments)
Crossfade time for punch, etc.
(output patching)
mal or as set)
Output patchbay
, *
(output word
length)
(word length of digital output)
(off)*, (on)
(shuttle monitor)
Shuttle monitor function
(off)*, (on)
(shuttle mute)
Shuttle mute function
*,
(oscillator)
(1k)
Line-up oscillator
Described in
*, 7.10, " REC MUTE
(recording silence)"
or
Described in
7.5, "Crossfade
times"
* (nor- 7.12.2, "Output
patchbay"
7.12.1, "Output
word length"
6.3, "Shuttle moni-
tor"
6.4, "Shuttle mut-
ing "
, 7.9, "Sine oscilla-
tor"
4 - Menu interface, etc.
4.7 TC menu
The following parameters are used to
control timecode operations:
V alues
Display
(*=default)
* (TC
(tape TC)
track),
(converted),
(absolute)
T ape timecode source
(SYS),
(frame mode)
(EXTERNAL),
(TAPE):
*,
,
System frame mode and external/tape frame rate display
* (off-tape),
(TC display)
(external),
(difference)
Timecode display source
(input TC timing)
Incoming timecode reference
(output TC timing)
log),
(digital)
Outgoing timecode reference
(output TC
tape),
source)
(regenerated),
(reshaped)
Source of outgoing timecode
* (5
(fast LTC)
frames),
(leap),
Fast LTC output mode
Described in
9.2, "Tape time-
code mode"
9.3, "Selecting the
frame mode",
9.4.1, "Showing
, input timecode",
, , 9.5.8, "Checking
the frame mode of
striped timecode"
9.4.1, "Showing
input timecode"
*, 9.4.2, "Timecode
input timing"
* (ana- 9.4.6, "Timecode
output timing"
* (from 9.4.3, "Timecode
output"
9.4.5, "Fast linear
timecode (LTC)
output"
24
TASCAM DA-78HR