Trilithic Model One Operation Manual page 59

Use F2 or F3 to scroll to TRANSMISSION.
Press F1 (ENTER) to toggle the transmis-
sion function to YES. The YES selection
indicates that the meter is in TRANSMIS-
SION Mode.
When you press F1 (ENTER), the Model
One displays the following prompt:
19:16:30
MEASUREMENTS MEASUREMENTS
MEASUREMENTS
MEASUREMENTS MEASUREMENTS
SCAN AUDIO
SCAN ENABLED
TRANSMISSION
LIMIT SETUP
FREQ TUNING STEP
SIGNAL LEVEL UNITS
TEMPERATURE UNITS
PRIOR MENU
# LOAD DEFAULT #
YES
When the meter displays the prompt, you
have the option to replace the initial
spectrum data with a new spectrum
reference or to use the original zero
reference level in memory.
If you wish to use the original zero
reference level, press F2 (NO) or you may
exit this screen by pressing F3 (EXIT).
If you press F2 (NO), the meter displays
the following prompt:
19:16:30
MEASUREMENTS MEASUREMENTS MEASUREMENTS
MEASUREMENTS MEASUREMENTS
SCAN AUDIO
PRESS F1 KEY FIRST
SCAN ENABLED
TRANSMISSION
TO PROCESS TRANS-
LIMIT SETUP
FREQ TUNING STEP
SIGNAL LEVEL UNITS
TEMPERATURE UNITS
PRIOR MENU
# LOAD DEFAULT #
ENTER
Model One Operating Manual ""! TRILITHIC
56 – Advanced Operation
DO YOU WANT TO
REPLACE INITIAL
SPECT DATA?
MISSION MEASURE
BACK
NO
SETUP
NO
NO
NO
ESC
SETUP
NO
NO
NO