Tilt/Favorite - Trilithic Model One Operation Manual

Measure BW (Digi type only) – When this
parameter is highlighted, press the FCN
button to enable the numeric key pad.
Once the desired modification is made,
press F1 to save the edit and exit the FCN
mode.
When you have made the desired edits to
the channel parameters, scroll to SAVE
AND EXIT and press F1. The Model One
returns to the EDIT CHANNEL PLAN
screen.
NOTE: Once you have modified the
channels in the existing plan, you will
need to press a function button (i.e.
SET) to exit the EDIT CHANNEL
PLAN screen.
CAUTION: Whenever you learn a
new Channel Plan, the previously
edited parameters will be overwritten
by the new plan and all files that were
saved with the previous plan will be
deleted.

TILT/FAVORITE

The Model One enables you to select up
to eight "favorite" channels. These
channels are also used when making the
Tilt measurement.
NOTE: You must select at least
FOUR channels to make the Tilt
Measurement. The Model One uses
the highest and lowest frequencies
when making the measurement.
Model One Operating Manual ""! TRILITHIC
34 – Model One Setup