Install The Drive - Tandberg Data Tape Backup System DLT4000 Installation Manual

Tandberg Data
2-4
Installing and Configuring the Tandberg DLT4000 Drive
2.3.

Install the Drive

Step Action
1
Note the Tandberg DLT4000 tabletop drive factory
settings.
2
Review Section 2.4.1.
3
Configure the Tandberg DLT4000 tabletop drive or
use on your system:
If you need to
Disable parity checking
Change the SCSI ID
4 Connect the cables.
Tandberg DLT4000 Installation Guide
See section
2.4.2.
2.4.3.