Updating The Firmware On The Tandberg Dlt4000 Drive (Drive Only Configuration) - Tandberg Data Tape Backup System DLT4000 Installation Manual

Tandberg Data
Tandberg DLT4000 Installation Guide
Configuring and Operating the Tandberg DLT4000 Drive
3.11.1. Updating the Firmware on the
Tandberg DLT4000 Drive
(Drive Only Configuration)
If the Write Protect indicator does not blink, check that:
1. POST passed
2. The drive is unloaded
3. The drive handle is in the down position
3-27