Connecting Cables - TANDBERG D12817-05 User Manual

Installation

Connecting cables

1. Microphone cable
• Connect the microphone to the microphone cable.
• Connect the microphone cable to the microphone input
on the TANDBERG 550.
2. Monitor cable(s)
Scart (Europe):
• Connect the Scart adapter to one of the Scart
connectors on your monitor.
Scart (Europe) & RCA/S-Video (US):
Audio:
The cable with one RCA connector on one side and two RCA
connectors on the other side:
• Connect the two RCA connectors to your monitor (or
Scart adapter) Audio Left/Right connectors (the audio
signal from the system is a monaural signal and
therefore is fed into both audio-in sockets on the
monitor).
• Connect the other end to 'Audio Out'.
Video:
• Connect the S-video cable to the S-video connector
on your monitor ( or Scart adapter). If you do not have
an S-video connector on your monitor, connect the
RCA-RCA video cable to the RCA connector on your
monitor.
• Connect the other end to 'Video Out'.
TANDBERG Videoconferencing System
12