Voice Activated Camera Positioning - TANDBERG D12817-05 User Manual

Voice Activated Camera Positioning

Through Voice Activated Camera Positioning and the use of two microphones, the camera will automatically view
the speaker.
Setup
Before using camera tracking, the camera positions used must be stored at presets P7 (Mic1) and P8 (AudioIn).
E : T
XAMPLE HE CAMERA POSITION STORED AT
SHOULD BE INCLUDED IN THE
AUTOMATICALLY SELECTED
Activating
Enable Camera Tracking by pressing 'CamTrack On' in the 'Preset 0-9' menu, which is activated by
presets
pressing the P button on the remote control. An on-screen indicator 'CamTrackOn' will appear.
P
When activating another video source (e.g. document camera), camera tracking will be temporarily
disabled until you re-select MainCam or a MainCam preset.
Pressing M O
mic off IC
A Voice Detector makes the system more tolerent of noise and ensures the camera will normally not be
moved by noise such as paper shuffling etc.
Deactivating
Disable Camera Tracking by:
• moving the camera manually.
• activating a MainCam preset when MainCam is already activated.
• disconnecting the call.
An on-screen indicator 'CamTrackOff' will appear.
TANDBERG Videoconferencing System
P7
MUST BE RELATED TO
P7 . W
CAMERA POSITION ETC
.
will temporarily disable camera tracking.
FF
M 1,
IC THEREFORE ALL PARTICIPANTS WHO ARE LOCATED CLOSEST TO
HEN CAMERA TRACKING IS ACTIVATED AND A PERSON CLOSE TO
29
General use
M 1
IC
M 1 , P7
IC SPEAKS WILL BE