Table of Contents
Advertisement
General use
General use
Adjusting volume
Press the V
OLUME
+
-
View outgoing video (selfview)
selfview
Press the S
ELFVIEW
To change the image being viewed on the monitor during a call press S
image is shown (far end/selfview/still image).
move pip
Press M
PIP to move your selfview as a Picture-in-Picture to different corners of the screen or to
OVE
switch it off.
Microphone on/off
mic off
To mute your microphone during a call, press M
microphone is off. In a call, if audio is detected, the on-screen symbol will start to flash. Pressing M
one more time will activate the microphone again.
Do Not Disturb / Sleep Mode
Press any Quick key when not in a call to activate the Quick Menu.
When Do Not Disturb is activated, the system will not accept any incoming calls. The caller will hear a busy
tone when calling this unit. A status line will indicate when Do Not Disturb is active.
TANDBERG Videoconferencing System
keys to adjust the volume level. An on-screen indicator will show the current level.
key to view your outgoing video.
O
. An on-screen indicator will appear when the
IC
FF
26
until the desired
ELFVIEW
O
IC
FF
Advertisement
Table of Contents
