Welch Allyn KleenSpec 790 Series Directions For Use Manual page 19

Directions for use
EMC guidance and manufacturer's declarations
Table 1. Emissions for all EQUIPMENT and SYSTEMS
The 790 series cordless illumination system is intended for use in the electromagnetic
environment specified below. The customer or user of the 790 series cordless illumination system
should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions Group 1
CISPR 11
RF emissions Class B
CISPR 11
Harmonic emissions Class A
IEC 61000-3-2
Voltage fluctuations/ Complies
flicker emissions
IEC 61000-3-3
Cordless illumination system
The 790 series cordless illumination system uses RF energy
only for its internal function. Therefore, its RF emissions
are very low and are not likely to cause any interference in
nearby electronic equipment.
The 790 series cordless illumination system is suitable for
use in all establishments including domestic and those
directly connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes.
17