Dismantling The Gas Pressure Spring; Dismantling The Gas Pressure Spring Evo / One - KaVo PHYSIO Evo Instructions For Use Manual

Note
If necessary, the upholstery must be removed and the interference protection must
be pressed downwards out of the seat cover using a screwdriver.

5.3 Dismantling the gas pressure spring

5.3.1 Dismantling the gas pressure spring Evo / One

Note
If the gas pressure spring is knocked out of the stool base too violently, this could
lead to damage to the paintwork of the PHYSIO Evo/One operator stool. To prevent
damage to the paintwork, you can place a piece of wood between the gas pressure
spring and the hammer.
▶ To prevent damage to the paintwork of the operator stool, carefully hammer the
gas pressure spring out of the stool base using a large rubber hammer. You can
place a piece of wood between the gas pressure spring and the hammer.
Instructions for use PHYSIO Evo/Evo F/One
5 Dismantling | 5.3 Dismantling the gas pressure spring
25 / 38