Eu Declaration Of Conformity - Nice TN2010L Instructions And Warnings For Installation And Use

and declaration of incorporation of "partly completed machinery"
Note - The contents of this declaration correspond to that stated in the official document filed in the offices of Nice S.p.A. and, in particular,
the latest version thereof available prior to the printing of this manual. The text herein has been re-edited for editorial purposes. A copy of the
original declaration can be requested from Nice S.p.A. (TV) Italy.
Revision: 6
Manufacturer's Name:
Address::
Authorized Person to constitute the
technical documentation:
Address::
Type of product:
Model/Type:
Model/Type:
The undersigned Roberto Griffa, in the role of Chief Executive Officer, declares under his sole responsibility that the product described above
complies with the provisions laid down in the following directives:
• Directive 2014/30/UE (EMC)
The product also complies with the following directives according to the requirements envisaged for "partly completed machinery" (Annex
II, part 1, section B):
Directive 2006/42/EC of the EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 related to machinery and amending the Directive
95/16/EC (recast).
- It is hereby stated that the relevant technical documentation has been compiled in accordance with annex VII B of Directive 2006/42/EC
and that the following essential requirements have been fulfilled:
1.1.1 1.1.2 1.1.3-1.2.1-1.2.6-1.5.1-1.5.2-1.5.5-1.5.6-1.5.7-1.5.8-1.5.10-1.5.11
- The manufacturer undertakes to transmit to the national authorities, in response to a reasoned request, the relevant information on the
" partly completed machinery ", while maintaining full rights to the related intellectual property.
- Should the " partly completed machinery" be put into service in a European country with an official language other than that used in this
declaration, the importer is obliged to arrange for the relative translation to accompany this declaration..
- The "partly completed machinery" must not be used until the final machine in which it is incorporated is in turn declared as compliant, if
applicable, with the provisions of directive 2006/42/EC.
The product also complies with the following standards:
EN 60335-1:2012+A11:2014, EN 62233:2008
EN 60335-2-103:2015
Place and Date: Oderzo, 05/09/2017
22 – English
EU Declaration of Conformity (N. 258/TN)
Language: EN
NICE S.p.A.
Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy
NICE S.p.A.
Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy
Electromechanical gear motor with incorporated control unit
TN2010L, TN2020L
Refer to the catalog
EN 61000-6-2:2005
EN 61000-6-3:2007+A1:2011
Ing. Roberto Griffa (Chief Executive Officer))