Ec Declaration Of Conformity - Nice SN6011 Instructions And Warnings For Installation And Use

and declaration of incorporation of "partly completed machinery"
Note - The contents of this declaration correspond to that stated in the official document filed in the offices of Nice S.p.A. and, in particular,
the latest version thereof available prior to the printing of this manual. The text herein has been re-edited for editorial purposes. A copy of the
original declaration can be requested from Nice S.p.A. (TV) Italy.
Revision: 8
Manufacturer's name:
Address:
Subject authorised to draw up the
technical documentation:
Product type:
Model / Type:
Accessories:
The undersigned, Roberto Griffa, as Chief Executive Officer, hereby declares under his own responsibility that the product identified above
complies with the provisions of the following directives:
Directive 2014/53/EU (RED)
In addition, the product conforms to the following directive in accordance with the provisions applicable to "partly-completed machinery"
(Annex II, Part 1, Section B):
Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2006 regarding machinery and amending
Directive 95/16/EC (recast).
- It is hereby declared that the relevant technical documentation has been compiled in accordance with Annex VII, Part B, of Directive
2006/42/EC and that the following essential requirements have been applied and fulfilled: 1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2-
1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
- The manufacturer undertakes to transmit, in response to a reasoned request by the national authorities, relevant information on the "part-
ly-completed machinery", without prejudice to the intellectual property rights of the manufacturer of the "partly-completed machinery".
- If the "partly-completed machinery" is commissioned in a European country with an official language other than the language used in this
declaration, the importer must include a translation to accompany this declaration.
- The "partly-completed machinery" must not be commissioned until the final machine in which it is to be incorporated is declared to conform
to the provisions of Directive 2006/42/EC, if applicable.
The product also complies with the following standards:
EN 60335-1:2012+A11:2014
EN 62233:2008
EN 60335-2-103:2015
EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011
Place and Date: Oderzo, 12 July 2017
28 – English
EC Declaration of Conformity (No. 194/SPIN)
Language: EN
NICE S.p.A.
Via Pezza Alta 13, 31046 Rustignè di Oderzo (TV), Italy
NICE S.p.A.
Electromechanical gearmotor with incorporated control unit and radio receiver
SN6011
ELDC, EPMA
- Health and safety (Art. 3(1)(a)): EN 62479:2010
- Electrical safety (Art. 3(1)(a)): EN 60950-1:2006+A11:2009+A12:2011+A1:2010+A2:2013
- Electromagnetic compatibility (Art. 3(1)(b)): EN 301 489-1 V2.2.0:2017, EN 301 489-3 V2.1.1:2017
- Radio spectrum (Art. 3(2)): EN 300 220-2 V3.1.1:2017
Mr Roberto Griffa (Chief Executive Officer)