Ec Declaration Of Conformity - Nice TN2020LR10 Instructions And Warnings For Installation And Use

Incorporated radio receiver
Product type
Frequency
Coding
Transmitter compatibility (1)
Memorisable transmitters
Input impedance
Sensitivity
Transmitter range
Outputs
Operating temperature
original declaration can be requested from Nice S.p.A. (TV) Italy.
Revision: 7
Manufacturer's name:
Address:
Subject authorised to draw up the
technical documentation:
Product type:
Model / Type:
Accessories:
complies with the provisions of the following directives:
• Directive 2014/53/EU (RED)
In addition, the product conforms to the following directive in accordance with the provisions applicable to "partly-completed machinery"
Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2006 regarding machinery and amending
Directive 95/16/EC (recast).
1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
- The manufacturer undertakes to transmit, in response to a reasoned request by the national authorities, relevant information on the "part-
ly-completed machinery", without prejudice to the intellectual property rights of the manufacturer of the "partly-completed machinery".
declaration, the importer must include a translation to accompany this declaration.
to the provisions of Directive 2006/42/EC, if applicable.
The product also complies with the following standards:
EN 60335-1:2012+A11:2014
EN 62233:2008
EN 60335-2-103:2015
EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011
Place and Date: Oderzo, 12 July 2017
4-channel receiver for radio remote control
433.92 MHz
52-bit FLOR-type digital rolling code
64-bit SMILO-type digital rolling code
Supported protocols: FLOR, O-CODE, SMILO
Up to 100 if memorised in Mode 1
better than 0.5 μV
there are obstacles and electromagnetic disturbances, and depends on the position of the
receiving antenna
For commands as per Tables 12 and 14
–20°C ... +55°C
EU Declaration of Conformity (No. 251/TN)
Language: EN
NICE S.p.A.
Via Pezza Alta 13, 31046 Rustignè di Oderzo (TV), Italy
NICE S.p.A.
"TEN" electromechanical gearmotor with incorporated control unit
TNLKCE, TN2030L, TN2020L
ELDC, EPMA
- Health and safety (Art. 3(1)(a)): EN 62479:2010
- Electrical safety (Art. 3(1)(a)): EN 60950-1:2006+A11:2009+A12:2011+A1:2010+A2:2013
- Electromagnetic compatibility (Art. 3(1)(b)): EN 301 489-1 V2.2.0:2017, EN 301 489-3 V2.1.1:2017
- Radio spectrum (Art. 3(2)): EN 300 220-2 V3.1.1:2017
Mr Roberto Griffa
English – 29