<Processing unit editing screen>
To start continuous measurement, click the continuous measurement button (
If you wish to stop continuous measurement, click the continuous measurement stop button (
The settings data cannot be edited during continuous measurement.
6-1-2
Measuring File Images in the RAMDisk or the External Memory,
i.e. USB Memory of the Vision Sensor
Select the measurement target file and click the Measure button.
Select the file as described below.
1
Click the file button.
2
Click the file selection button (
3
Click the Measure button.
To start continuous measurement, click the continuous measurement button (
If you wish to stop continuous measurement, click the continuous measurement stop button (
The settings data cannot be edited during continuous measurement.
6-1-3
Measuring Logging Images in the Vision Sensor Memory
Select the measurement target logging image and click the Measure button.
Select the file as described below.
1
Click the Logging image button.
2
Click the Measure button.
If you wish to change the measurement target logging image, click the button for measuring the previ-
ous image (
) or click the button for measuring the next image (
To start continuous measurement, click the continuous measurement button (
If you wish to stop continuous measurement, click the continuous measurement stop button (
The settings data cannot be edited during continuous measurement.
FH/FHV Series Vision System Operation Manual for Sysmac Studio (Z343-E1)
) and then select the target file.
6 Online Debugging
).
).
).
).
).
6
).
).
6 - 3