Table of Contents
Advertisement
2.3
Hardware Installation
Note!
Make sure you have installed the software driver before you install the
module (please refer to Section 2.2 Driver Installation).
After the driver installation is completed, you can now go on to install the USB-4750
module in any USB port that supports the USB 1.1/2.0 standard, on your computer. It
is suggested that you refer to the computer's user manual if you have any doubts.
Please follow the steps below to install the module on your system.
1.
Touch the metal part on the surface of your computer to neutralize the static
electricity that might be in your body.
2.
Plug your USB module into the selected USB port. Use of excessive force must
be avoided; otherwise the module might get damaged.
Note!
In case you installed the module without installing the driver first, operat-
ing systems will recognize your module as an "unknown device" after
reboot, and will prompt you to provide necessary driver. You should
ignore the prompting messages (just click the Cancel button) and set up
the driver according to the steps described in Section 2.2 Driver Installa-
tion.
USB-4750 User Manual
6
Advertisement
Table of Contents
