Solid-state drive
Table 5-5
Spare part description and number
Description
256 GB, SATA-3, TLC
128 GB, SATA-3, TLC
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the solid-state drive:
Remove the Phillips M2.0 × 3.0 screw (1), and then pull the solid-state drive module from the socket (2).
▲
Reverse this procedure to install the solid-state drive.
(Preparation for disassembly on page
Bottom cover on page
Battery on page
29).
26).
27).
Component replacement procedures
Spare part number
L23223-001
L23222-001
35