HP 245 G7 Maintenance And Service Manual page 50

3. Thoroughly clean the thermal material from the surface of the heat sink (1) and associated system
board component (2) each time the heat sink is removed. Replacement thermal material is included with
the heat sink and system board spare part kits.
To remove the heat plate from fanless models:
1. In the order indicated on the heat plate, remove the four Phillips M2.0 × 3.0 screws (1) that secure the
heat plate to the computer.
2. Lift the heat plate from the computer (2).
42 Chapter 5 Removal and replacement procedures for authorized service provider parts