Attaching Accessories - Sony HDC2000 Operation Manual

Attaching Accessories

Mounting the Camera to the Tripod
Several types of tripods are available. Select an appropriate
tripod according to the type of lens to be used, and mount the
camera to the tripod as described below. For details, refer to
the instruction manual of the tripod.
For detailed information on choosing an appropriate tripod for
different camera and lens combinations, contact a Sony
service representative, a Sony representative or a tripod
manufacturer. The instructions below give an example of just
Bottom of the video camera
V-wedge shoe (supplied with
the tripod)
1
Attach the V-wedge shoe (supplied with the tripod) to
the bottom of the camera with the two screws.
The position where the shoe should be attached is
decided considering the balance of the weight of the
camera and lens.
2
Check that the pan-lock and tilt-lock levers of the
tripod are securely locked.
3
Mount the camera to the tripod holding it by the
handles on each side.
4
Lock the camera to the tripod with the stopper on the
tripod.
Note
If the feet on the bottom of the camera interfere with mounting
the tripod, remove them as illustsrated.
one type of attachment. Before attaching, choose a tripod cam
plate appropriate for your lens type and lens weight.
Caution
Firmly attach the V-wedge shoe to the camera, and mount the
camera to the tripod securely. Otherwise the camera may fall
down.
V-wedge shoe
12
HDC2000
Tripod
Stopper