Sony HDC2000 Operation Manual page 49

MAINTENANCE
Page title Item
PageNo.
<LENS2> REMOTE CONTROL
M07
FOLLOW FOCUS
<MIC GAIN> MIC1
M08
MIC2
<CALL/TALLY> CCU CALL
M09
CAM CALL
UP TALLY
BRIGHTNESS
NUMBER DISPLAY
CAMERA NUMBER
TALLY GUARD
<OUTPUT FORMAT> CURRENT
M10 (U11)
Settings
OFF, ON, (OFF)
CONTROL ZOOM&FOCUS, FOCUS,
MODE FOLLOW FOCUS
OFFSET ADJUST 1, 2, 3, 4, 5
SENS
OFFSET 1, 2, 3, 4, 5
CANCEL GAIN
20, 30, 40, 50, 60 dB
20, 30, 40, 50, 60 dB
OFF, ON
OFF, ON
TALLY 0 to 100, 50
NUMBER 0 to 100, 50
AUTO, OFF, ON
---, 1 to 96
CCU LINK OFF, ON
EXTENDER OFF, ON
FILTER DISC OFF, ON
1080: 24PsF, 59.94i, 29.97PsF,
23.98PsF, 59.94P, 50i, 25PsF,
50P, 59.94i (2×), 50i (2×)
720: 59.94P, 50P, 59.94P (2×),
50P (2×)
Description
Lens remote control from MSU/RCP on/off setting.
Same function as the Active button on the Zoom/
Focus Control screen of the MSU/RCP.
(OFF): When lens is not supported.
ZOOM & FOCUS: Control ZOOM and FOCUS from
an MSU/RCP (control by lens demand is not
supported).
FOCUS: Control FOCUS from an MSU/RCP. ZOOM
is controlled by lens demand.
FOLLOW FOCUS: FOCUS is controlled by lens
demand, but can be adjusted (offset fine
adjustment) from an MSU/RCP. ZOOM is
controlled by lens demand.
Note
Settings other than FOLLOW FOCUS cannot be
modified when the offset is not 0 and REMOTE
CONTROL is OFF. To change settings, set
REMOTE CONTROL to ON.
Sets the sensitivity of superimposing the offset of
the MSU.
Sets the sensitivity of canceling the offset on the
demand side.
Can be modified only in standalone operation.
Selects whether TALLY lights for CALL signal.
ON sets CAMERA NUMBER to the same number
as the CCU number.
Selects whether to prevent changes while TALLY is
lit.
Displays the current format.
49