Specifications - Sony HDC2000 Operation Manual

Hd color camera
Hide thumbs Also See for HDC2000:
Table of Contents

Advertisement

Specifications

General
Power requirements
AC 240 V, 1.7 A (max.)
DC 180 V, 0.9 A (max.)
DC 12 V, 10 A (max.)
Operating temperature –20°C to +45°C (–4°F to +113°F)
–20°C to +60°C (–4°F to +140°F)
Storage temperature
Mass
Approx. 21 kg (46 lb 5 oz) (main unit only)
Dimensions
See page 60.
Imager
Imager
2/3-type Progressive Scan CCD
Method
3-CCD, RGB
1920 (horizontal) × 1080 (vertical)
Effective resolution
Electrical characteristics
Sensitivity
F10.0 with 1080/59.94i
F11.0 with 1080/50i (at 2000 lx with 89.9%
reflectivity)
Image S/N
Typical –60 dB/–64 dB (NS MAX)
Horizontal resolution
1000 TV lines (at center of screen)
5 % or higher modulation
Geometric distortion
Negligible (not including lens distortion)
Optical system specifications
Spectral system
F1.4 prism
Built-in filters
Color temperature conversion filters
A: cross filter
B: 3200K (clear)
C: 4300K
D: 6300K
E: 8000K
ND filters
1: clear
2: 1/4 ND
3: 1/8 ND
4: 1/16 ND
5: 1/64 ND
Input connectors
DC IN
XLR 4-pin (1)
10.5 V to 17 V DC
RET CONTROL
6-pin (1)
AUDIO IN 1, AUDIO
XLR 3-pin, female (1 each)
IN 2
For MIC: –60 dBu (can be selected up to
–20 dBu by menu or HDCU2000/2500
operations), balanced
For LINE: 0 dBu, balanced
Output connectors
TEST OUT
BNC type (1)
1.0 Vp-p, 75-ohm terminated
PROMPTER 1,
BNC type (1)
PROMPTER 2
1.0 Vp-p, 75-ohm terminated
VF
D-sub 25-pin (1)
DC OUT
4-pin (1)
10.5 V to 17 V DC, 1.5 A maximum
(This may be limited depending on the load
and input conditions.)
SDI 1, SDI 2
BNC type (1 each)
SDI-MONI
BNC type (1)
Input/output connectors
CCU
Electro-optical connector (1)
TRACKER
10-pin (1)
REMOTE
8-pin multi-connector (1)
INTERCOM 1,
XLR 5-pin female (1 each)
INTERCOM 2
CRANE
12-pin multi-connector (1)
Lens
36-pin multi-connector (1)
USB
USB 2.0 Type A 4-pin (1) (for connecting
USB drive)
NETWORK TRUNK
Supplied accessories
Angle adjustment brackets (2)
Front cover (1)
Number plates for side panel (2 sets)
Number plates for up-tally lamp (1 set)
Cable clamp (2)
Operation guide (1)
Operation manual (CD-ROM) (1)
Optional accessories
HD Electronic
HDVF-EL70 (7.4-type, color)
Viewfinder
BKP-7911 Script Holder (with script light)
CAC-6 Return Video Selector
Related equipment
HDCU2000/2500 HD Camera Control Unit
MSU-1000/1500 Master Setup Unit
RCP-1000/1500-series Remote Control Panel
VCS-700 Video Selector
CNU-700 Camera Command Network Unit
HZC-CSM10 Camera System Management Software
CNA-1 Camera Control Network Adaptor
Design and specifications are subject to change without
notice.
58
RJ-45 type 8-pin (1)

Advertisement

Table of Contents
loading

Table of Contents