Setting The Focus Assist Function - Sony HDC2000 Operation Manual

3
Turn the viewfinder fully clockwise.
4
Turn the slide position knob clockwise to
and turn the slide-lock knob counterclockwise to
release the lock of the slide position.
Slide position
knob
STOP
FREE
COUNTER BLANCE
5
Slide the viewfinder so that the lever is seen through
the slit in the panning base mounting plate (see
illustration in step 6). Then turn the slide position
knob counterclockwise to
slide position.
6
While pressing the lever, pull the handle of the
viewfinder toward you then lift the viewfinder to
remove it.
5
SLIDE
STOP LOCK
FREE
COUNTER BLANCE
FREE,
Slide-lock
knob
SLIDE
LOCK
STOP to secure the
6
Lever
Setting the Focus Assist
Function
Using the OPERATION menu, you can activate the assist
functions for easier focusing on the viewfinder.
Adding the VF Detail Signal
Adding the VF detail signal to sharp edges in the image on the
viewfinder screen makes it easier to check the focusing
condition by observing changes in the detail signal or in the
color converted from the detail signal (color detail).
The focus setting where the detail signal becomes strongest is
the best focus setting. COLOR DETAIL and ZOOM LINK can
also be set to ON/OFF via the switches on the back panel.
1
Turn on the camera.
2
Set the DISPLAY switch to MENU while pressing the
MENU SELECT switch toward ENTER.
The camera enters Menu mode, and "TOP" is displayed at
the upper right corner of the screen.
3
Rotate the MENU SELECT knob to align the arrow
marker ( ) to "TOP," then press the MENU SELECT
,
switch toward ENTER.
The TOP MENU screen is displayed.
<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
4
Rotate the MENU SELECT knob to align the arrow
marker ( ) to OPERATION, then press the MENU
,
SELECT switch toward ENTER.
The CONTENTS page of the OPERATION menu is
displayed.
CONTENTS
01.<VF DISPLAY>
02.<'!'IND>
03.<VF MARKER>
04.<VF DETAIL>
05.<FOCUS POSITION METER1
06.<FOCUS POSITION METER2
07.<FOCUS ASSIST>
08.<VF DYNAMIC CONTRAST>
09.<ZEBRA>
10.<CURSOR>
5
Rotate the MENU SELECT knob to align the arrow
marker ( ) to <VF DETAIL>, then press the MENU
,
SELECT switch toward ENTER.
The <VF DETAIL> page is displayed.
15
00 TOP