Paint Menu - Sony HDC2000 Operation Manual

OPERATION
Page title Item
PageNo.
<TRACKER> TRACKER RECEIVE
SELECT
19
INPUT LEVEL
OUTPUT
LEVEL
<OPERATOR FILE> READ (USB t CAM)
20
WRITE (CAM t USB) Execute via ENTER.
PRESET
FILE ID
CAM CODE
DATE

PAINT Menu

PAINT
Page title Item
PageNo.
<SW STATUS> FLARE
P01
GAMMA
BLK GAM
KNEE
WHT CLIP
DETAIL
LVL DEP
SKIN DTL
MATRIX
<VIDEO LEVEL> WHITE
P02
BLACK
FLARE
GAMMA
V MOD
FLARE
V MOD
TEST
Settings
SEPARATE, MIX
INTERCOM --- , LEFT, RIGHT, BOTH
ENG --- , LEFT, RIGHT, BOTH
PROD --- , LEFT, RIGHT, BOTH
PGM1 --- , LEFT, RIGHT, BOTH
PGM2 --- , LEFT, RIGHT, BOTH
20 dBu, 0 dBu
–6 dB, 0 dB, 6 dB
L-CH 0 dBu, –6 dBu, –12 dBu, –18 dBu,
–20 dBu, –24 dBu
R-CH
Execute via ENTER.
Execute via ENTER.
alphanumerics (max.14
characters)
Camera code
Settings
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
R/G/B: –99 to +99, 0
R/G/B/M: –99 to +99, 0
R/G/B/M: –99 to +99, 0
R/G/B/M: –99 to +99, 0
R/G/B/M: –99 to +99, 0
ON, OFF
ON, OFF
OFF, SAW, 10STEP
Description
JN model only
When ENG/PROD is set to MIX, ENG and PROD
appears instead of this item (the setting values are
same as this item).
Reads the operator file from a USB drive.
Writes the current settings of the operator file items
to a USB drive.
Sets the operator file items to the preset values in
internal memory.
Enters a comment for the operator file to be written
to a USB drive.
See "To specify a character string" (page 23).
Display only
Display only
Description
R, G, B, and M (master) values can be
independently set.
(M cannot be set for WHITE.)
41