Power Over Ethernet Commands - Symbol ES3000 User Manual

5.20 Power Over Ethernet Commands

peth trap
Use the peth trap command to configure a PoE trap.
peth trap
no peth trap
S D
YNTAX ESCRIPTION
D V :
EFAULT ALUE
C M :
OMMAND ODES
R :
EFERENCE
M :
ENU
E :
XAMPLE
!Set PETH trap on
Switch(config)# peth trap
Switch(config)#
peth usage-threshold
Use the peth usage-threshold command to configure power usage threshold.
peth usage-threshold <percent>
S D
YNTAX ESCRIPTION
D V :
EFAULT ALUE
C M :
OMMAND ODES
R :
EFERENCE
M :
ENU
E :
XAMPLE
!Set power usage threshold 60
Switch(config)# peth usage-threshold 60
Switch(config)#
: The peth trap command has no arguments or keywords
Global configuration
: 1-99, The usage threshold expressed in percents for comparing the
measured power and initiating an alarm if the threshold is exceeded.
Global configuration
5-109
Command Line Interface