Main Menu->Vlans->Vlan Port Configuration Menu - Symbol ES3000 User Manual

3.5.31 Main Menu->VLANs->VLAN Port Configuration Menu
Use the VLAN Port Configuration screen to configure VLAN configurations for each port. The PVID
is default to 1 for every port.
Set Port VID:
Set Frame Type:
Set GVRP Status:
When a PVID on VLAN configuration is deleted, the PVID is changed to the default value of
PVID, 1. All other configurations are kept.
The following entry is used when PVID 2 is removed.
Port
3
Sets PVID of a port.
Sets the acceptable frame types, All or Tagged Only. When Tagged Only
is selected, all non-tagged packet are dropped.
Enables or disables the GVRP of a port.
PVID Acceptable Frame Type
1 Tagged Only
Administration Console Access
GVRP
Enable
3-47