Quality Of Service Commands - Symbol ES3000 User Manual

5.14 Quality of Service Commands

mls qos
Use the mls qos command to enable or disable the QoS implemented in the system.
mls qos
no mls qos
S D
YNTAX ESCRIPTION
D V :
EFAULT ALUE
C M :
OMMAND ODES
R :
EFERENCE
M :
ENU
E :
XAMPLE
!Disable Quality of Service
Switch(config)# no mls qos
Switch(config)#
!Enable Quality of Service
Switch(config)# mls qos
Switch(config)#
priority-queue cos-map
Use the priority-queue cos-map command to map the 802.1p traffic class to the port transmitting
queues.
priority-queue cos-map <traffic class> <priority>
S D
YNTAX ESCRIPTION
D V :
EFAULT ALUE
C M :
OMMAND ODES
R :
EFERENCE
M :
ENU
: The mls qos command has no argument.
The feature is disabled by default.
Global configuration
Cisco
Advanced Switch Configuration Menu->Quality of Service->Set Status
: <priority> Integer ranges from 0 to 7.
<traffic class> 0 to 3, 0 is lowest, 3 is highest
Global configuration
Cisco
Advanced Switch Configuration Menu->Quality of Service->
Set Priority Queue
5-81
Command Line Interface