Main Menu->Snmp Config.->Authorized Managers - Symbol ES3000 User Manual

3.5.7 Main Menu->SNMP Config.->Authorized Managers
Use the Authorized Managers page to list the SNMP managers and their associated information.
There are two community strings in default mode, private and public. Read-only is allowed with public
and read-write is granted to private. Change the two community strings as required.
Four commands are available to set the Manager IP, community string, Status, Privilege, and IP
address.
Set Manager IP:
Set Manager Community:
Set Manager Privilege:
Set Manager Status:
Sets the IP address of a specified community. The access is
restricted to specified IP only.
Sets community string.
Sets the access privilege, 1 is Read-only and 2 is Read-Write.
Enables or disables a community string.
Administration Console Access
3-17