Igmp Snooping Commands - Symbol ES3000 User Manual

5-68 ES3000 User Guide

5.12 IGMP Snooping Commands

ip igmp snooping
Use the ip igmp snooping command to enable or disable IGMP snooping as implemented in the
system.
ip igmp snooping
no ip igmp snooping
S D
YNTAX ESCRIPTION
D V
EFAULT ALUE
C M
OMMAND ODES
R :
EFERENCE
M :
ENU
E :
XAMPLE
!Enable igmp snooping
Switch(config)# ip igmp snooping
Switch(config)#
!Disable igmp snooping
Switch(config)# no ip igmp snooping
Switch(config)#
ip igmp snooping aging-time
Use this command to configure the router and host port aging time for an IGMP snooping operation.
ip igmp snooping aging-time {router | host} <sec>
S D
YNTAX ESCRIPTION
D V
EFAULT ALUE
C M
OMMAND ODES
R :
EFERENCE
: The ip igmp snooping command has no argument.
: The feature is disabled by default.
: Global configuration
Cisco
Advanced Switch Configuration Menu->IGMP Snooping->Enable/Disable
IGMP Snooping
: The router port aging time is integer value ranges from 60 to 600.
The host port aging time is integer value ranges from 130 to 1225.
: The default value is 260 seconds for the host port, and 125 seconds for
the router port.
: Global configuration
None