Commands - Symbol ES3000 User Manual

5-94 ES3000 User Guide
5.16 802.1x Commands
dot1x radius
Use the dot1x nas-id command to set 802.1x admin status.
dot1x radius <NASID>
S D
YNTAX ESCRIPTION
D V
EFAULT ALUE
C M
OMMAND ODES
R :
EFERENCE
M :
ENU
E :
XAMPLE
! NAS ID "dot1x_auth"
Switch(config)# dot1x radius dot1x_auth
Switch(config)#
dot1x port-control
Use the dot1x port-control command to set 802.1x port control status.
dot1x port-control <control>
S D
YNTAX ESCRIPTION
D V
EFAULT ALUE
C M
OMMAND ODES
: <NASID>
:
: Global configuration
: <control> auto
force-authorized
force-unauthorized
:
: Interface configuration
String, ID for dot1x request to Radius server.
The controlled Port is set to the
Authorized or Unauthorized state in
accordance with the outcome of an
authentication exchange between
the Supplicant and the
Authentication Server.
The controlled Port is required to be
held in the Authorized state.
The controlled Port is required to be
held in the Unauthorized state.