Radius Commands - Symbol ES3000 User Manual

5-102 ES3000 User Guide

5.17 Radius Commands

radius-server host
Use the radius-server host command to specify a RADIUS server host.
radius-server host < ip-address> [timeout <seconds>] [retransmit <retries>]
[key <string>]
no radius-server
S D
YNTAX ESCRIPTION
C M
OMMAND
R :
EFERENCE
M :
ENU
E :
XAMPLE
!Set radius server 192.168.0.1 timeout 5 second retransmit 4 times and
Shared Secret "karl_radius"
Switch(config)# radius-server host 192.168.0.1 timeout 5 retransmit 4 key
karl_radius
Switch(config)#
: ip-address
timeout
seconds
retransmit
retries
key
string
: Global configuration
ODES
Cisco
IP address of the RADIUS server host
(Optional) The time interval in seconds that the router
waits for the RADIUS server to reply before
retransmitting.
The range is 1 to 1000.
(Optional) The number of times a RADIUS request is
re-sent to a server.
The range is 1 to 100.
(Optional) Specifies the authentication and encryption
key used between the NAS and RADIUS server.
(Optional) Text string.