Transport; Packaging; Delivery Inspection; Installation And Start-Up - Expobar QUARTZ User Manual

TRANSPORT

Packaging

The machine is shipped in a unique carton box which uses expanded polystyrene paddings.
The machine box is provided with conventional symbols that can be perfectly visible during the handling
and storage tasks.
The machine box must stay in a vertical position during the transport. Do not tip or try to place the box
tilted sideways in any way.
During transportation the box must be protected from hits, impacts, shocks and exposure of bad weather
elements.

Delivery inspection

After the delivery, check that the machine is in the exact condition described in the documentation of the
transport, accessories included.
Check that the machine does not have any damage caused by transportation. If this happens, inform to the
shipper and the distributor of the machine.
The packaging materials are potentially dangerous and should be kept away from children.
Make sure to leave the materials of the box and packaging at a suitable recycling center.

INSTALLATION AND START-UP

Positioning

MIN. 10cm
MIN. 30cm
The minimum dimensions for the place of the machine must be 360
mm wide x 415mm depth x 620 mm high.
Position the machine on a flat and stable surface, away from water
and sources of heat.
It should be located in a dry environment, since excessive humidity
will affect the machine.
Do not cover the machine with plastic film or cloths.
This machine can be connected to the mains water supply.
For more information, see the technical manual.
Note:
i
Make sure that air is able to circulate behind the machine
(minimum 10cm).
QUARTZ
9
R