i
9.5 Check the taught-in positions
1.
Open, tilt and close the window or door with the fixed
DuoFern Window/Door Contact.
Each detected position is acknowledged by acoustic
signals:
1 x
2 x
3 x
i
i
20
5 minutes
= Open
= Tilted
= Closed
The DuoFern Window/Door Contact is ready for
operation if the teach-in process has been fully
completed.
If the installation position of the window or door
changes over time and the teach-in positions
therefore no longer lead to the desired control
commands, you may need to carry out a new
teach-in process.
You can check the stored window and
door positions for five minutes after
the teach-in process.
EN