Deleting All Settings; Closing The Housing Cover - RADEMACHER DuoFern Installation And Commissioning Manual
Window/door contact
Source: rademacher.de
Hide thumbs
Also See for DuoFern:
- Instruction manual (120 pages) ,
- Installation and operating instrictions (48 pages) ,
- Instruction manual for the electrical connection and for commissioning (48 pages)
Table of Contents
Advertisement
i
12. Deleting all settings
1.
i
13. Closing the housing cover
Press the cover carefully onto the sensor part after com-
pleting all the settings. Check the correct positioning of the
cover so that it is fully engaged on both sides.
Press the log-off button for five
seconds; the LED flashes red during
this time.
As soon as the LED lights up red
continuously, all settings are deleted
and the DuoFern Window/Door
Contact returns to its original default
condition.
EN
27
Advertisement
Table of Contents
