Installation Examples - RADEMACHER DuoFern Installation And Commissioning Manual

i

9.2 Installation examples

Check that the sensor part and magnet fit into the window
frame. You can find the dimensions in the technical specifi-
cations on page 8. Alternatively, we recommend an
installation on the window frame.
As a window contact in the window frame
Recommendation to protect against condensation
Install the sensor part in the side jamb of the window frame
and never on the bottom rail as water may accumulate there
from time to time.
The ideal installation position for the magnet is at a distance
of approx. 15 mm between the window frame and the tilted
window.
The magnet is attached
to the handle side of the
window sash.
Opening width of approx. 15 mm
The sensor part is
mounted on the fixed
frame.
EN
15