Leveling The Scale - Sartorius Factory Series Installation Instructions And Safety Information

14

Leveling the Scale

Purpose:
– To compensate for unevenness at the place of installation
– To ensure exactly horizontal positioning of the scale for consistent
repeatability of the weighing results
Always level the scale again any time after it has been moved.
Leveling Scales
FC06BBE-SX, FC6CCE-HX, FC2CCE-SX, FC12CCE-SX,
FC6CCE-SX, FC12CCE-IX
Only the two front feet are used for levelling.
§ Retract the two rear feet (only on scales with a rectangular load plate)
§ Turn the two front feet as shown in the diagram until the air bubble is
centered within the circle
> Several leveling steps are usually required
§ Extend the two rear feet until they touch the surface on which the scale rests
Leveling FC...EDE Scales
§ Adjust the four leveling feet until the air bubble is centered within the circle
of the level indicator