General Safety - Promac FX-820VA Manual

General Safety

Note: Failure to comply with these instructions can result in serious injury.
This machine just like all machines has potential hazards when operating and handling. With correct handling
and attention to operate can substantially reduce the risk of accident. There will be inevitable accident to
operators If the normal precaution was ignored.
The machine was only created for the designate use. We strongly recommended you not to modify the
machine designed structure or use it in the manner where it was not designed to.
If you have any questions about the operation of the machine and doese not have the instruction manual,
please call the dealer.
GENERAL RULES FOR SAFE HANDLING MACHINES
1. For your own protection always read the manual before the machine is put into operation.
Stop using the machine if the service or operation limits meet or find any defect when using the machine.
2. Keep protective coverings in good working condition and do not remove or modify.
3. Electric power tools with a mains plug with protective contact always needs to be connected to earth( ground)
in the socket. if intermediate connector contact without protection was used need to create grounding
connection. The machine can never be operated without grounding.
4. Always remove loose lever or key of the machine. Develop a behavior that always check if all the loose
controls have been removed before switching on the machine.
5. Keep the work area free of obstacles. Obstructed work areas can cause accident.
6. Machine does not operate in a dangerous environment. Do not operate the machine in damp or wet
operating rooms or expose it to rain.
7. Keep children and visitors away from the machine. Keep children and visitors always at a safe distance
from the work area.
8. Protect the workshop or work area against unauthorized access. The machine was equipped with lockable
latches and main switch for parental control.
9. Do not overload the machine. The machine will perform best when working within it's designed performance.
10. Do not use attachments for work of which they are not designed.
11. Wear proper work clothes. Avoid to wear loose clothing, gloves, scarves, rings, neck tie or other jewelry
on hands. These may get caught by moving machine parts. Wear non-slip shoes and wear hat to
covers long hair.
12. Always wear safety glasses. According to safety prevention, wear a mask or safety glasses when the
work will generate chips or dust.
13. Clamp workpieces. Hold the workpiece with a vise or chuck, this is more secure than by hand,
and you can free both hands to operate the machine.
27