Main Controls; Emergency Switch - Promac FX-820VA Manual

Unpacking
Shi ppi ng cont ent :
1. Drilling milling machine model FX-820VA, with digital drilling depth indication
2. Tool box contains:
1 clamping screw M10 .................................. 1 Allen key 2.5, 3, 4, 5, 6mm
2 T-bolts 10mm ............................................. 1 Adapter MK II / B 18
1 Wrench 17/19mm ...................................... 2 screwdriver (flat + PH)
1 expeller ...................................................... 1 oil can
User st eps f or unpacki ng
1. Remove the packaging.
2. Remove the mounting screws of the machine and start the machine from the pallet.
3. Proceed as described on page 8th
NOTE
Do not use paint thinner, gasoline or similar!

Main Controls

S p e e d d s i
S p e e d s e e l t c

Emergency switch

Start -/Stop swi tch
Drilling depth indicator
Spindle
Chip protection,
with micro switch
Table clamp handle
Z-axis adjustment wheel
p a l y
r o
Cover spindle
Crank moun ted head
loc ki ng head
Driving selection
speed range
Feed lever
Fine feed
Adjustabl e table
Drilling scale
Tabl e cl amp handles
31