Safety Instruction - Promac BX-834 Instruction Manual

2.

Safety Instruction

Read Instruction Manual before operating the machine for your own safety.
1.Make sure the power voltage is for the machine. Before connecting the plug to socket, it is necessary
to check the power spec. to avoid damaged occurred.
2. During the machine is not used for a long time, the plug should be disconnected.
3. Never stand the power cable near the fire or water environment, any broken or pressed of power
cable is not allowed.
4. It shall be stable and securely fixed in machine installation procedure for the machine to be used
safety.
5. The working piece must be tightly fixed on table by vise or clamp.
6. Use recommended cutting liquid, consult the owner's manual for recommended.
7. Feed speed should be executed under safety scope, please refer to manual 3-3.
8. Wear proper apparel, no loose clothing, gloves, neckties, ring, bracelet to get caught in operation.
Always wear safety glasses, cap and specific clothes.
9. Check all parts are in place and securely locked before transportation. Bump and crash are
prohibited.
10. Routing maintenance and repaired should be executed follow the rules of manual.
11.Recommended use the industrial suction to clean the chip .
12.Recommended move the working piece which the weight over 10 kg used carrier move it.
13.Recommended wear safety gloves when install the drilling bit or tooling to avoid hurt your hand.
14.This machine only be used following material brass, cast iron, steel, iron, aluminum .
15. It is prohibited to open the pulley cover in operation.
16. It is prohibited to use damaged or cracked parts
17. It is prohibited to removed the guard cover away in operation.
:
4