Festo CPX Series Manual page 103

3. Analogue input module CPX−4AE−I
Module parameters: Monitoring the CPX module
4828 + m * 64 + 0
Function no.
Description With the analogue input modules, monitoring of individual faults can be activated
or deactivated (suppressed) independently of each other. Active monitoring
causes the following: The fault is:
Bit Bit 0:
Bit 1
Bit 7:
Values 1 = active (presetting); 0 = inactive
Remark
Tab. 3/10: Monitoring the CPX module
Festo P.BE−CPX−AX−EN en 0906e
Description of the parameters
sent to the CPX field bus node
displayed by the module common error LED.
monitoring short circuit/overload in the sensor supply
6: reserved
monitoring parametrizing faults
Monitoring short circuit at sensors:
Monitoring can also be set for the complete CPX terminal (see CPX system
manual, system parameter Monitoring").
Monitoring parametrizing faults:
Some parameters are checked for non−permitted values during parametrizing:
Data format
Lower limit
Upper limit
The setting of the module parameter Monitoring parametrizing faults" is only
effective for channel−specific parametrizings if the corresponding channel
parameter Monitoring parametrizing faults" is set to active".
m = module number (0 47)
3−19