Philips AVENT SCF332 Manual page 10

English
10
Cleanable parts
Clean the following parts before (first) use and after each subsequent use. Please check the list in the
General Description section to see which items are included with your breast pump.
Breast pump parts:
-
Silicone diaphragm
-
Pump body
-
Massage cushion
-
White valve
-
Cover
Bottle parts:
-
Philips Avent Natural bottle
-
Dome cap
-
Screw ring
-
Teat
-
Sealing disc
Supplies needed for cleaning:
Washing in sink
-
Mild dishwashing liquid
-
High quality drinking water
-
Soft brush or clean dish towel
-
Clean sink or bowl
Warning: Do not use antibacterial or abrasive cleaning agents when you are cleaning.
1 Disassemble the breast pump and bottle completely. Also remove the white valve from the breast
pump.
Caution: Be careful when you remove the white valve and when you clean it. If it gets damaged,
your breast pump does not function properly. To remove the white valve, gently pull at the
ribbed tab on the side of the valve.
2 Wash the parts in the sink or dishwasher.
Washing in sink: Detach all parts and soak for 5 minutes in hot water with some mild dishwashing
liquid. Clean all parts with a soft brush or clean dish towel and then rinse them thoroughly (Fig. 2).
Washing in dishwasher: Clean the parts, except the motor unit, the silicone tube and cap and the
adapter, in the dishwasher (on the top rack only).
Note: To clean the valve, rub it gently between your fingers in warm water with some washing-up
liquid. Do not insert objects into the valve, as this may cause damage.
Washing in dishwasher
-
Mild dishwashing liquid/tablet
-
High quality drinking water