Maintenance; Service; Warranty - Unitron Versamet 4 Manual

MAINTENANCE

Please remember to never leave the microscope with any of the objectives or eyepieces removed and
always protect the microscope with the dust cover when not in use.

SERVICE

®
UNITRON microscopes are precision instruments which require periodic servicing to keep them
performing properly and to compensate for normal wear. A regular schedule of preventative maintenance
by qualified personnel is highly recommended. Your authorized UNITRON
this service. Should unexpected problems be experienced with your instrument, proceed as follows:
1. Contact the UNITRON
problems can be resolved simply over the telephone.
2. If it is determined that the microscope should be returned to your UNITRON
®
UNITRON for warranty repair, pack the instrument in its original Styrofoam shipping carton. If you no
longer have this carton, pack the microscope in a crush-resistant carton with a minimum of three inches
of a shock absorbing material surrounding it to prevent in-transit damage. The microscope should be
wrapped in a plastic bag to prevent Styrofoam dust from damaging the microscope. Always ship the
microscope in an upright position; NEVER SHIP A MICROSCOPE ON ITS SIDE. The microscope or
component should be shipped prepaid and insured.
This microscope is warranted to be free from defects in material and workmanship for a period of five (5) years for
mechanical and optical components and one (1) year for LED bulb and electrical components from the date of
invoice to the original (end user) purchaser. This warranty does not cover damage caused in-transit, misuse,
neglect, abuse or damage resulting from improper servicing or modification by other than UNITRON
service personnel. This warranty does not cover any routine maintenance work or any other work, which is
reasonably expected to be performed by the purchaser. Normal wear is excluded from this warranty. No
responsibility is assumed for unsatisfactory operating performance due to environmental conditions such as
humidity, dust, corrosive chemicals, deposition of oil or other foreign matter, spillage or other conditions beyond the
control of Unitron Ltd. This warranty expressly excludes any liability by UNITRON Ltd. for consequential loss or
damage on any grounds, such as (but not limited to) the non-availability to the End User of the product(s) under
warranty or the need to repair work processes.
component occur under this warranty contact your UNITRON
warranty is limited to the continental United States of America. All items returned for warranty repair must be sent
freight prepaid and insured to Unitron Ltd., 73 Mall Drive, Commack, NY 11725 – USA. All warranty repairs will be
returned freight prepaid to any destination within the continental United States of America. For all foreign warranty
repairs, return freight charges are the responsibility of the individual/company who returned the merchandise for
repair.
UNITRON
UNITRON
VERSAMET 4 INVERTED METALLURGICAL MICROSCOPE
®
distributor from whom you purchased the microscope. Some
LIMITED MICROSCOPE WARRANTY
®
is a registered trademark of UNITRON, Ltd., Commack, NY 11725
73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
Should any defect in material, workmanship or electronic
®
distributor or UNITRON
®
distributor can arrange for
®
distributor or to
®
®
at (631) 543-2000. This
21
approved