Advertisement
User manual
Carton 1 of 3:
1.)
First, take out the three black flat pads from the accessory bag. Place these flat pads on your hi-fi
rack or another suitable base, where the final position of your
2.)
Master Innovation
Then take the
the turntable's spikes onto the flat pads.
Master Innovation
Pic. 4:
3.)
To avoid humming noises it may be necessary to ground the bearing. To do so, plug the ground
cable provided into the hole in the bearing fixing bolt on the underside of the turntable.
Pic. 5: Grounding the bearing
4.)
Remove the protective security tape from the bearing housing.
8
turntable body (drive unit) from the next packaging layer and place
drive unit
Master Innovation
turntable will be.
© clearaudio electronic GmbH, 2019-03
Advertisement
