Advertisement
User manual
If you use the Speed Light (AC039) you can reach an even higher or more
accurate adjustment, completely independent of the power line or frequency of
your country.
As well, the 300 Hz calibrated light, used as an external light source is completely
in dependent from possible power line fluctuations, which could influence the
result by regular light. The 300Hz of the
quartz oscillator and permit a very exact adjustment.
Stroboscope Testrecord
Please put the
Here you also have the possibility to choose between three different speeds.
With the outside scale you can detect the speed of 33.3rpm, with the middle scale 45rpm and with
the inside scale you can detect the speed of 78rpm. Again, the big advantage of the Clearaudio
strobe disc is, that you can place your cartridge onto the strobe record, while measuring the speed,
as there are grooves provided on the disc. This means, for the first time a real time speed analysis
is possible under realistic circumstances.
Press the button of the speed light source and place it parallel over to the scale and adjust the motor
or turntable speed until the horizontal lines do not move anymore.
As more accurate your turntable speed is adjusted, as better the overall sonic appearance of the
record playback will be!
It is mandatory to check the speed several times through out the year, to ensure that other influences
are not minimizing the sound quality.
Please enjoy your vinyl records now even more !
Yours Clearaudio team
Loving music
Speed Light
Light source:
blue LED / 300Hz precision light source (calibrated)
Battery:
V 23GA – 12V – Alkaline
Made in Germany
with the fine lines upward on your turntable.
Technical Data:
(Technical changes are subject without notification)
Date: 2019-03
Clearaudio electronic GmbH
Spardorfer Str. 150
91054 Erlangen
Germany
Tel: +49 9131 40300 100
Fax: +49 9131 40300 119
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
Speed Light
- Tip -
are generated by a stabilized
21
Advertisement
