Table of Contents
Advertisement
Assign sensor names
Default all the temperature sensors will have the same name ('Temp sensor xx'). To distinguish between the different
temperature sensors it is strongly advised to assign a more meaningful name (e.g. the name of the room) to each sensor.
1. Press and hold the 'Menu' button for ±4 seconds to
open the extended menu.
Location
T
Tem p s ens or 01
Pr ogr am
Mode
Menu
←
→
2. Scroll through the extended menu using the ↑ or ↓
button until the 'Sensor settings' item appears.
Location
T
Tem p s ens or 01
Sens or s et t i ngs
Mode
Menu
←
→
3. Select the sensor settings menu with the → button.
Location
T
Tem p s ens or 01
Oper at i ng m ode
Mode
Menu
←
→
CONFIGURATION OF THE TEMPERATURE SENSORS
↑
↓
↑
↓
↑
↓
VMB1TC Temperature controller manual – rev 5.0
4. Scroll through the sensor settings menu using the ↑
or ↓ button until the 'Change name' item appears.
Location
T
Tem p s ens or 01
Change nam e
Mode
Menu
←
→
5. Select the change name menu with the → button.
The cursor flashes on the first character of the name.
The second line indicates the address of the selected
temperature sensor. With this address the location of
the sensor can be determined.
Location
T
_em p s ens or 01
01 Change nam e
Mode
Menu
←
→
6. Change the character at the cursor location with the
↑ or ↓ button and confirm with the → button.
The cursor moves to the next character.
Location
T
K_m p s ens or 01
01 Change nam e
Mode
Menu
←
→
↑
↓
↑
↓
↑
↓
47
Advertisement
Table of Contents
