Master clock
When your Velbus installation contains multiple modules with built-in clock (temperature controllers VMB1TC and control
panel VMB4PD) it is important that all clocks have the same time setting. This can be achieved by setting the clock of one
module as reference (master). This module will then synchronize the other module clocks every day. This function is
default disabled.
1. Press and hold the 'Menu' button for ±4 seconds to
open the extended menu.
Location
T
Conf i gur at i on
Mode
Menu
←
→
2. If necessary scroll through the extended menu using
the ↑ or ↓ button until the 'Configuration' item
appears
Location
T
Conf i gur at i on
Mode
Menu
←
→
3. Select the configuration menu with the → button.
T
Location
Language
Mode
Menu
←
→
4. Scroll through the configuration menu using the ↑ or
↓ button until the 'Master clock' item appears.
Location
T
M as t er c l oc k
Mode
Menu
←
→
28
↑
↓
↑
↓
↑
↓
↑
↓
VMB1TC Temperature controller manual – rev 5.0
5. Select the temperature Master clock menu with the →
button.
T
Location
M as t er c l oc k ___
Mode
Menu
←
→
6. Switch the master clock on or off using the ↑ or ↓
button.
Location
T
M as t er c l oc k
Mode
Menu
←
→
7. Confirm the master clock setting with the → button.
Location
T
M as t er c l oc k
Mode
Menu
←
→
8. Exit the menu with the T button.
T
Location
M o
0: 03
Mode
←
↑
↓
↑
On
↓
↑
↓
↑
Menu
↓
→