Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Velbus Manuals
  4. Control Unit
  5. VMBSTART1W
  6. Getting started

Velbus VMBSTART1W Getting Started

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
GETTING STARTED WITH VELBUS

Advertisement

loading

Related Manuals for Velbus VMBSTART1W

Summary of Contents for Velbus VMBSTART1W

  • Page 1 GETTING STARTED WITH VELBUS...

  • Page 2: Install The Hardware

    1 INSTALL THE HARDWARE Connect all the modules using the included VMBRAIL-R interconnection rail and a 4-wired bu (not included, we recommend EIB or FTP). VMBRSUSB VMB4RYLD 230 VAC Confi guration Relay module module Add more modules to complete the installation VMBSMPS Power supply...
  • Page 3 2 SET THE TERMINATORS us cable Most Velbus modules have a terminator (jumper or switch) that VMBGPOD by factory default is open. In a Control module standard Velbus installation exactly two of these terminators have to be closed, with as much distance (wire) between them as possible.
  • Page 4 3 PROGRAM THE MODULES You can fi nd complete instructions on how to program Velbus modules in the Velbus Installation Guide Part 2: Programming (free download on velbus.eu). To get you started, here’s how to program an on/off switch: 1. Connect your PC with the Velbus configuration module using the included USB cable.
  • Page 5 6. (Optional) Left-click on the name of a selected module or channel to change it. Eg. change “Relay 1” to “Light kitchen” 7. Drag “Button 1” and drop it on relay 1 (“Light kitchen”) drag and drop 8. In the dialog that opens, select “Toggle” and press “OK”...
  • Page 6 3 PROGRAM THE MODULES (continuation) 9. Press the “Synchronize” button. In the “Synchronize Project” dialog, make sure “Only write changes” is checked, and press “Write” When the writing has finished (this should take only a few seconds), you can now operate Relay 1 (“Light kitchen”) by pressing the upper left touch button (Channel 1) of the glass control module.
  • Page 7 4 EXTRA To change the text on the oled screen, select the VMBGPOD module in Velbuslink and click on the gear icon. In the Confi guration window, click on the “edit bitmap” button and add names and icons: In the Confi guration window, you can fi nd a lot of other settings concerning feedback lights, navigation, screensaver settings etc.

  • Page 8: Troubleshooting

    If this doesn’t solve your problem, please refer to the support pages on www.velbus.eu, or contact your dealer. 6 MORE INFORMATION The Velbus Installation Guide is a complete, detailed manual on Velbus hardware (Part 1) and programming (Part 2). Download it for free on www.velbus.eu.

This manual is also suitable for:

Vmbstart1b