Assign An Action To The Go-To-Bed Time - Velbus VMB1TC Manual

Assign an action to the go-to-bed time

The go-to-bed time can be used with the thermostat program but also to perform a certain action e.g. switching on
staircase lighting, closing the roll-down window shutters, switching certain mains outlets off...
As an example, we will automatically switch on the staircase lighting as soon as the set go-to-bed time is reached.
This can also be configured through the Velbus link software on the computer but here we explain the manual procedure.
1. Remember the address of the relay module to
reinstate it later on.
2. Set the address of the relay module to 'E1' to learn
the on-function of the staircase lighting that is
connected to channel 1.
The 'Mode 1' LEDs are flashing to indicate the
learning mode.
Out1 Out2
Mode/ Mode/ Mode/
Mode/
ADDR. ADDR. Time2 Time2 Time2 Time2
0 0 0
Time1 Time1 Time1
0 0 0
Learn CH1 CH2 CH3
Fx : OFF
x=CH1...4
Ex : ON
: : 9x :
Dx TGL Bx TG1 ST1
Cx : PBM Ax : TG2 8x : ST2
ON Rx Tx Mode1
3. Press and hold the 'Menu' button for ±4 seconds to
open the extended menu.
T
Location
Conf i gur at i on
Mode Menu
← →
4. If necessary scroll through the extended menu using
the ↑ or ↓ button until the 'Configuration' item
appears.
Location T
Conf i gur at i on
Mode Menu
← →
36
Out3 Out4
4 Channel relay module
Mode/
Time1 Mode/Time2
Time2
0 0 0:Moment Start-stop
1:5s Staircase
2:10s Non-Retrigger
3:15s Turn Off Delay
4:30s Turn On Delay
5:1' Trig Release
Time1
6:2' Blink
0 0
7:5' 5'
8:10' 10'
9:15' 15'
A:30' 30'
CH4
B:1h 1h
C:2h 2h
VMB4RY D:5h 5h
velleman E:1day 1day
F:Toggle Toggle
Mode2 Mode3 Mode4
↑
↓
↑
↓
VMB1TC Temperature controller manual – rev 5.0
5. Select the configuration menu with the → button.
T
Location
Language
Mode Menu
← →
6. Scroll through the configuration menu using the ↑ or
↓ button until the 'Link go-to-bed' item appears.
Location T
Li nk go- t o- bed
Mode Menu
← →
7. Select the link go to bed menu with the → button. As
a confirmation, the relay of channel 1 is energised.
T
Location
Go- t o- bed:
Mode Menu
← →
↑
↓
↑
↓
↑
on
↓