Table of Contents
Advertisement
Searching for temperature sensors
Before the controller can work together with the temperature sensors VMB1TS it must first scan the network for all
connected temperature sensors.
When temperature sensors are installed or removed afterwards, the search process must be repeated to update the list of
sensors to the new situation.
1. Press and hold the 'Menu' button for ±4 seconds to
open the extended menu.
Location
T
Conf i gur at i on
Mode
Menu
←
→
2. If necessary scroll through the extended menu using
the ↑ or ↓ button until the 'Configuration' item
appears.
Location
T
Conf i gur at i on
Mode
Menu
←
→
3. Select the configuration menu with the → button.
Location
T
Language
Mode
Menu
←
→
38
↑
↓
↑
↓
↑
↓
VMB1TC Temperature controller manual – rev 5.0
4. Scroll through the configuration menu using the ↑ or
↓ button until the 'Scan sensors' item appears.
T
Location
Sc an s ens or s
Mode
Menu
←
→
5. Select the scan sensors menu with the → button.
The search for sensors on the network is now in
progress.
Location
T
Sc anni ng 00
Mode
Menu
←
→
6. Once the search process is completed, the first of the
connected temperature sensors is shown on the
display.
T
Location
Tem p s ens or 01
M o
0: 09 20
Mode
Menu
←
→
↑
↓
↑
↓
↑
↓
Advertisement
Table of Contents
