Command Set; Introduction - Advantech ADAM-5000 Series User Manual

ADAM-5080 Counter/Frequency Module
6.9 ADAM-5080 Counter/Frequency Command Set
Command Syntax
$aaT
$aaF
$aaSiArrff
$aaSiB
#aaSi
#aaSiCj
$aaSiØ(data)
$aaSiØ
$aaSiCj5s
12
Command Name
Read Module Name
Read Firmware
Version
Set Configuration
Read Configuration
Read All Channel
Counter (Frequency)
Data
Read One Channel
Counter (Frequency)
Data
Set Digital filter Scale
Read Digital filter
scale
Set Counter
Start/Stop
ADAM-5080 Counter/Frequency Module
Description
Returns the module
name from a specified
ADAM-5000 system.
Returns the firmware
version code from a
specified ADAM-5000
system.
Set slot index and
counter mode
The command
requests the
Configuration of slot
Returns the input value
of all channels for the
specified input module
for a specified system
in engineering unit only.
The command will
return the input value
from one of the four
channels of a specified
module.
Set the filter seconds
to start to measure the
input signal.
Read the filter
seconds to start to
measure the input
signal.
Request the
addressed
counter/frequency
module to start or stop
the counting.